PETOL™
PETOL™
PETOL™

PETOL™ Hydraulic Friction Tongs with Chain

Hydraulic friction tongs with chain.
Enter a value into any field and click “Convert”
Inches: = Millimeters: 

Pounds: = Kilograms: 

This same configuration can be used for all tongs.

TORQUE (ft.-lbs.) = FORCE (lbs.) x LENGTH (in.) /12

Enter a value into either field and click “Convert”
Ft. lbs. of Torque: 
N*m: 

Torque illustration
PETOL™ Hydraulic Friction Tongs with Chain
Click any Catalog No. to send an inquiry.
CATALOG NO. O.D. GRIPPING WIDTH WEIGHT MAXIMUM WORKING LOAD*
FA3:3.000U 3.000" 4.31" 30-1/2 lbs. 8,500 ft-lbs.
FA3:3.062U 3.062" 4.31" 30-1/2 lbs. 8,500 ft.-lbs.
FA3:3.250U 3.250" 4.31" 30-1/2 lbs. 8,500 ft.-lbs.
FA3:3.500U 3.500" 4.31" 30-1/2 lbs. 8,500 ft.-lbs.
FA3:3.625U 3.625" 4.31" 30-1/2 lbs. 8,500 ft.-lbs.
FA3:3.750U 3.750" 4.31" 30-1/2 lbs. 8,500 ft.-lbs.
FA3:4.000U 4.000" 4.31" 30-1/2 lbs. 8,500 ft.-lbs.
FA4:4.000U 4.000" 4.31" 40 lbs. 10,200 ft.-lbs.
FA4:4.250U 4.250" 4.31" 40 lbs. 10,200 ft.-lbs.
FA4:4.500U 4.500" 4.31" 40 lbs. 10,200 ft.-lbs.
FA4:4.750U 4.750" 4.31" 40 lbs. 10,200 ft.-lbs.
FA4:5.000U 5.000" 4.31" 40 lbs. 10,200 ft.-lbs.
FA4:5.375U 5.375" 4.31" 40 lbs. 10,200 ft.-lbs.
Special O.D. sizes available upon request. Special sizes are non-returnable.
*Maximum capacity of the Friction Breakout Unit hydraulic system is 5,000 ft.-lbs.
WARNING!
Do Not Exceed Maximum Working Load.
Overloading may result in injury or death.
Always use a load cell or other calibrated indicating device to monitor the line pull on the tong to avoid overload.
Do not operate without a manual.
Follow OSHA, NSC, etc. standards, safe practices, & procedures.